Traditional clock generators use a simple integer-N phased-locked loop (PLL)-based architecture. The output clock frequency is a function of the input clock frequency and the PLL divider values as shown in the equation
Equation: fOUT = fIN.N/P.R
Traditional single PLL-based IC solutions are suitable for simple integer clock multiplication of reference inputs or clock generation from crystal inputs. However, many applications require clock generation of multiple non-integer-related frequencies (e.g., 125 MHz Ethernet and 106.25llMHz Fibre Channel). Traditional solutions require that the crystal frequency be changed to support each unique frequency plan. This forces the designer to use one or more custom crystals and multiple clock generator ICs to generate the required set of frequencies, increasing the cost, complexity and power consumption of the overall solution.
New Any-Rate Clock Multiplier Architecture Simplifies Design
Recent advances in mixed-signal analog design have made it possible to provide any-rate frequency synthesis from a single device. Silicon Labs newest clock architecture leverages a fractional-N PLL used in concert with a low-jitter fractional divider termed MultiSynth to produce any-rate frequency synthesis on multiple output clocks. The flagship of this new product family is the Si5338 Any-Rate, Any-Output Quad Clock Generator. This technology dramatically simplifies timing architectures by integrating the frequency synthesis capability of four PLLs in a single device, greatly reducing size and power requirements compared to traditional solutions.
The Si5338s low phase noise, high-frequency VCO supplies a high-frequency output clock to the MultiSynth block on each of the four independent output paths. The first stage of the MultiSynth architecture is a fractional-N divider, which switches seamlessly between the two closest integer divider values to produce the exact output clock frequency with 0 ppm error. To eliminate phase error generated by this process, the MultiSynth calculates the relative phase difference between the clock produced by the fractional-N divider and the desired output clock and dynamically adjusts the phase to match the ideal clock waveform. This novel approach makes it possible to generate any output clock frequency without sacrificing jitter performance. Based on this architecture, each output clock can be individually programmed to generate any frequency from 0.16 to 350 MHz, and select frequencies to 700 MHz. Typical jitter performance enabled by this MultiSynth-based architecture is 1 ps RMS.
Shingle style architecture is an innovative form of Queen Anne and it was originated in America during the last two decades of 19th century.This name was given by Vincent Scully, a historian of building architecture.Among the various structures in America that are constructed in this style, The Hotel del Coronado in San Diego is considered as the biggest.The houses that are built in this style are horizontal structures built up on a stone laid foundation.The asymmetrical designs and irregular construction make the building process highly complicated and as a result the cost of construction was far beyond the affordable range for common people.Thus it was considered as a luxury homes design. The roofs are more complex in this type of architecture. Many of such houses have gabled roofs with a tower in the front. A few houses have roofs that are hipped. In the gambrel form of roofs, the third storey of the building will be hidden in the roof so that the building will appear as a two storeyed building. The roof shingles and wall shingles will be in different colors. Most of the houses have towers and if a building is without tower, a part of its wall will be bulged out.
This type of architecture has the provision for more numbers of big and small windows. The windows are mostly double-hung with a single sash below and multiple sashes above. For huge walls, the windows will be in 2, 3 or more rows and there are various designs for the windows. In the most complex designs, large windows are kept in bays with 1, 2 or 3 stories. The more stylish windows will be in square, rectangular or circular shapes.Entrance with spacious porch is characteristic of this architecture.People used to relax in the porches which are supported by balusters, columns or stone supports.
The modern houses that are built in Shingle style architecture offer a host of distinctive features including natural surroundings, energy efficiency and healthy indoor atmosphere. These houses demonstrate how wood, stone and sunlight can be utilized to provide a healthy shelter.There are many holiday homes that are built in this style of architecture. Many wealthy people have constructed this type of homes at famous resorts and also at sea-side plots. Natural colors, exterior covered by wooden shingles and an asymmetric structure are the basic features of this architectural form. The other common features are big porches, irregular roofs, towers, verandas, asymmetric floors, chimneys, huge staircases and fireplaces etc.
Are you looking for Shingle style architects and luxury vacation homes, vanbrouck is the best choice. It is highly recommended from both a design and value standpoint when we were looking to home designs and build our dream home. For more information about Shingle style architecture please visit us.
Are you seeking drafting and architecture training? If so, you must understand that in order to become a legal, practicing architect in the United States, you are required to follow a specific educational path, and be licensed.
To attain a professional license, future architects must first attain professional drafting and architecture training from a qualified school. Upon successful graduation, candidates are required to participate in an internship to continue their drafting and architecture training. After that, the student may go on to taking the Architect Registration Examination (ARE) and must receive passing scores on all divisions.
If you are wondering what drafting and architecture training really consists of, the coursework will generally include related subjects such as architectural history, theory, building design, construction techniques, liberal arts, math, physical sciences, professional practice, arts and design, and computer aided drafting (CAD).
If you are serious about a career in drafting and architecture, then a vocational school or community college is a good place to gain your footing. Most employers are seeking experienced and well-educated candidates, so it is important to obtain a solid background in academics and technologies suited for the dual career. Drafting and architecture training that can be transferred to a 4-year college can be used as a stepping stone to a Bachelor Degree in Architecture and Drafting. Some vocational schools offer comprehensive technical training that will lead to a certificate or diploma of completion; others may offer an Associate Degree.
Aspiring professionals who have completed their vocational drafting and architecture training, and have successfully met all requirements of licensure, may earn anywhere from $25,000 to nearly $100,000 per year, depending on combined education and experience.
If you would like to learn more about Drafting and Architecture Training and Drafting and Architecture Schools, or even Online Drafting and Architecture Schools, you can find more in-depth information and resources on our website.
DISCLAIMER: Above is a GENERAL OVERVIEW and may or may not reflect specific practices, courses and/or services associated with ANY ONE particular school(s) that is or is not advertised on our website.
Copyright 2007 – All rights reserved by Media Positive Communications, Inc.
Notice: Publishers are free to use this article on an ezine or website, provided the article is reprinted in its entirety, including copyright and disclaimer, and ALL links remain intact and active.
Sustainability means managing the resources well without damaging the environment now or in the future. In other words sustainability also refers to ensure that our decisions today may not harm the future opportunities for future generations. Now, have you ever thought that what a sustainable architect does in terms of product, process or buildingdesign?Sustainable architecture is a term that describes environmental friendly design methods in the field of architecture.
A client can believe on sustainability but the proof and evidence can help the client to better understand the concept of sustainability. Architect Brighton offers sustainable modern architecture, design and master planning service in order to meet the needs of their clients. Their goal is to create -green’ architecture which is magnificent in terms of design, keeping in mind the sustainable lifestyle and culture. Sustainable architect is not an individualist approach rather it’s a holistic approach. These architectsare more concerned about the reuseand recycling of the natural resources that are input to a building. A well designed building will have number of issues like water and energy utilization, proper use of materials and much more. Architects can deal with the ecological aspects of constructing these buildings. These aspects are designed to increase the efficiency without being detracting from the function of the building.
Sustainable architect focuses on designing a unique set of strategies to construct or develop a building intelligently. The architects minimize the use of nonrenewable resources in the development and function of buildings. These architects must consider the material flow in the building ecosystem. Few of these have been mentioned below:
Building materials and used materials Energy usage and combustion by products Water usage and Graywater sewage Consumer goods and recyclable materials Solar radiation and wasted heat Wind and polluted air Rain and groundwater
Before constructing a building, Architect Brighton keeps in mind three important strategies i.e. energy conservation, water conservation and material conservation. Apart from this, an architect should put certain efforts to reduce the impact of a building on its local environment (e.g., current terrain, plants, wildlife).In order to attain sustainability, Sustainable architect must be well educated and professionally trained about the various environmental issues. They must be well aware of the methods and techniques of developing a sustainable design building with economical use of natural resources. If the growth would concentrate on creating the best with what already prevails, re-using or adjusting current components and communities, certainly the outcomes would be remarkable.
IT industry is the leading sector in the commercial business world. It has many streams to develop the business and to leave the footprints across the globe. They are IT services, hardware implementation, software development, marketing and many more. Software development is the major stream to gain popularity with new innovative technologies and applications. There are numerous platforms and programming languages to develop several software programs and applications to enhance the business. They are Java, HTML, XML, C++, embedded C, Dotnet, visual basics, Siebel, primavera, oracle, SQL and many more. All these platforms are used to design, code and develop multiple applications both for web and desktop purpose.
These days, many organizations are looking for the new innovations to enhance the businesses. Enterprise architecture is the one, which can help organizations enhance the efficiency and flexibility. It helps the business to identify the marketing strategies in several ways to increase the competency and performance. This stream has the ability to translate these marketing insights and needs to common business language of IT strategy to maintain the relationship with the business line executives. It can solve several issues in business to understand the multiple products, platforms, strength and weakness. Generally, it is defined as the process of translating the business strategies into an effective way of enterprise.
These days, many organizations are offering enterprise architecture jobs to enhance their marketing ideas to give an outstanding performance. People, who enter into this field, are designated as enterprise architects. They can assist the organizations to accomplish the business values and to drive the smarter initiatives to improve the performance. Creation, improvement and communication is the key requirement for this architecture that is varied by the principles. It has improved the models with different specifications to describe the evolution. It has a good scope in the IT world with many processes and enterprises to get the benefits.
It has several frameworks such as IAF, EAF, DoDAF and TOGAF. These frameworks are also used to improve the flexibility and growth in the industry. It is the major applications to develop the communication among all kinds of business units to get more industrial needs. In today’s innovative world, many IT companies have implemented this stream to maintain the growth and unit relationship. It is important to manage the several requirements and units in the industry. For that, you have to develop the communication to avoid many hassles. Hence, enterprise architecture is the one to maintain these communication and relationship and improve the performance.
Get more information on: Enterprise Architecture Jobs & IT Service Desk Jobs
In today’s world of instant gratification, Architecture Animation is providing a virtual tour of the property in a future-completed state can be a very intense and emotional experience although it is in the concept stage in reality. Animation usually begins with the panoramic representation of the external features that include landscaping, hedges, fences, roads and exterior surroundings in general. The exterior view of the building shows the faade where architecture, materials and design can be understood. Architectural Animation is a small architectural movie created on a computer. An architectural animation is a series of hundreds or even thousands of still images. When these images are assembled and played back they produce a movie effect much like a real movie. The Architectural Animation project consisted of exterior and interior Visuals to help with design approval. The Architectural Development was accurately shown within the Architectural Visualizations and the Architectural Animation. It is possible to add a computer-created environment around the building to enhance reality and to better convey its relationship to the surrounding area; this can all be done before the project is built giving designers and stakeholders a realistic view of the completed project. Architectural Animation is now a key part in Architectural Project Development. In recent years the accelerating importance of animation in communicating architecture, it can take shape in a variety of ways – slick animated renderings bringing a prospective project to life, a finished project layered with music and a narrative bringing the emotive dimensions of a building to the surface, and even the purely conceptual expression of architecture as an artistic exploration. They represent an animation object of architecture by taking into consideration various geometrical entities and rules. Architecture Animation are made with focusing heavily on different factors like width, height, breadth, lines, surface with curves of building components. Considering in the avenue of film or in current events how time and cost consuming it could be to recreate an event. The architecture animation allows artists to create these events using models, than rendering the models, which provides life into the structure to create a sequence of events. Imagine that you want to make your building better than others in an effective manner. Then you will need something to make you very clear about how to build your proposed building structure. If you have some kind animation of your building well before it gets constructed, then it becomes a lot easier for you to achieve your goal. Animated buildings and animated interiors design for buildings are the best suitable option for you to do this.
The Cisco IP Next-Generation Network (IP NGN) Structure Skills shows knowledge the IP NGN architecture, from revenue to support. The Innovative IP Next-Generation Network Structure Skills is not currently required for qualifications, but is optionally available for Gold and Leading qualified associates. We are also flying the addition of this specialization as an option for Gold Certification.
Is your organization interested in taking full advantage of the Cisco Innovative IP NGN Structure Skills for Gold Certification? If so, deliver an email that contains your associate organization name and a member of the program staff will contact you with more details.
Cisco IP NGN Structure Skills helps your company:
Develop revenue, specialized and service abilities for incorporated social media solutions
Increase specialized proficiency internally
Gain identification as a specialized associate in the Cisco Partner Locator
Explore IP NGN resources
This specialization also allows you to a range of additional benefits. You can:
Participate in Cisco route motivation programs
Receive invites to Cisco subsidized associate activities
Access Partner Knowledge Connection
Use My Cisco to customize web content and get details quickly
Send an argument stating your accomplishment
Visit the Cisco Design Area for examined styles and configurations
Examination 650-756 includes 60 concerns and time permitted to finish this exam is 60 moments or 1 time. This exam is available in British terminology. Candidates can sign-up for this exam at any Pearson VUE middle.
The 650-756 Innovative IP Next-Generation Network (NGN) Structure Area Professional (PANGNFE) examinations will determine a learner’s understanding of the Cisco IP NGN architecture and capability to map specialized alternatives to company needs. You will also need to show a knowing of the different foundations of the Cisco IP NGN architecture. This exam is a need of the Innovative IP NGN Structure Expertise for Area Technical engineers. Quality will determine a learner’s capability to provide an obvious and powerful concept around the functions, functions and advantages of the Cisco IP NGN architecture in business-focused conditions. It will also analyze a learner’s capability to evaluate typical problems throughout a company that Cisco IP NGN architecture can help fix and efficiency in introducing company influencers for Cisco IP NGN architecture programs.
650-754 Exam Topics
The following subjects are typical recommendations for the articles likely to be involved on the examination. However, other relevant subjects may also appear on any particular distribution of the examination. To be able to better indicate the 650-754 material of the examination and for quality requirements, the recommendations below may modify whenever without observe. They include:
Describe Cisco IP NGN conditions and advantages
Describe Cisco IP NGN alternatives and how to arrange them with client needs
Describe typical client objections
Describe the aggressive surroundings and how to place Cisco IP NGN solutions
Describe how to create and existing Cisco IP NGN alternatives as a company situation to the customer
Describe the company and specialized advantages of the Cisco IP NGN architecture
Describe the company individuals for Cisco IP NGN structure applications
A web sites architecture is what grounds all future search engine marketing efforts. An optimal web site architecture facilitates a search engine in traversing
and understanding the site. Therefore, creating a web site with a search engine optimized architecture is a major contributing factor in achieving and maintaining high search engine rankings.
Architecture should also be considered throughout a web sites lifetime by the web site developer, alongside other factors such as aesthetics and usability. If a new feature does not permit a search engine to
access the content, hinders it, or confuses it, the effects of good content may be reduced substantially.For example, a web site that uses Flash or AJAX technologies inappropriately may obscure the majority
of its content from a search engine.
Optimizing a sites architecture frequently involves tinkering with variables that also affect usability and the overall user perception of your site. When we encounter such situations, we alert you to why
these certain choices were made. Sometimes we find that SEO enhancements run counter to usability. Likewise, not all designs that are user friendly are search engine friendly. Either
way, a compromise must be struck to satisfy both kinds of visitors users and search engines.
One common misconception is that search engine optimization efforts can be made after a web site is launched. This is frequently incorrect. Whenever possible, a web site can and should be designed to be
search engine friendly as a fundamental concern.Unfortunately, when a preexisting web site is designed in a way that poses problems for search engines,search engine optimization can become a much larger task. If a web site has to be redesigned, or partially
redesigned, the migration process frequently necessitates special technical considerations. For example,old URLs must be properly redirected to new ones with similar relevant content.
D printing technology is used to manufacture prototypes, tools, and end-user parts directly from a CAD design. This printing technology offers unprecedented flexibility as it can create a part of any dimension out of any material. Some of the 3d printing materials used include metals, polymers, ceramics, composites, and many more. The 3D printing technology has complete control over material composition, surface texture, and micro-structure of the prototype. 3D printing technology also allows the user to construct prototypes using two different materials. >
Lets take a look at this amazing technology and how it has affected the field of architecture and medicine:
3D printing for Architecture
Architects know that there is nothing like a physical model of a building when it comes to displaying their work or design concept. Physical models also play an important role when it comes to explaining and convincing the customer while selling a project.
3D printers are affordable and high quality solutions for architects. Building a physical model requires great deal of expertise, precision, and time. 3D printing machines help designers focus on their building design, while the devices make 3D models of the project.
Many architects are not tech-savvy and are not used to operating complex devices. 3D printers do not require human intervention at any stage of the printing process. Architects just need to need to draw a CAD diagram of the project and instruct the 3D printer to build a 3D model. The 3D printer can print the model within a few hours, which can then be presented to the client.
3D printers are capable of producing of 3D models with accuracy and speed without compromising on the finer details of the architectural project. The price of desktop 3D printing machines is not that high and independent architects can also afford them.
3D printing for Medicine
The application of 3D printing technology can also be found in the production of medical devices. There are different 3D printing materials available that can be used to build real parts. For example, manufacturing hearing aids is a complex process because they are custom-fit devices and cannot be mass produced. 3D printing greatly helps in such matters where medical devices need to custom-fit a patient.
The future of the 3D printing technology is very bright. Market experts state that 3D printing technology will be affordable to the masses by the next decade. The prices of 3D printing devices are falling rapidly, and it is believed that the prices of 3D printers will drop by as much as 80% in the next 5-10 years. It will not be a surprise to see 3D printing devices in each household just like refrigerators, washing machines, and televisions.
Being elderly and needing daily support from a long term residential care facility doesnt mean your accommodation has to be plain, unstylish, boring, or worse – institutional. With a diverse selection of affordable architectural styles today, even long term care accommodation can let go of the utilitarian architecture and begin with a fresh new start of appealing design that reflects a home-like atmosphere in a functional package.
Designing senior living with a reflection of the past, a base of the practical present and a touch of the future are sure to meet the needs of the aging population as it continues to grow. The senior consumer of the future will come with many profiles and will be looking for living arrangements that reflect a wide expanse of taste, living requirements and values, at a range of price points from affordable to extravagant.
If you had the option to design and build your own home, or a facility that would become your home, wouldnt you let your imagination run wild and creativity soar to include and consider the many possible design options that exist in the resource bank of architecture?
Architecture today is a wide-open array of taste from the old world style with the accents of stone and stucco, tile roofs and heavy beams all very suitable to homebuyers looking for a connection to the historic past. A farmhouse or a country home with simple floor plans, warm colours and cozy spaces would please many individuals looking for a connection to an era of not so long ago. Ranch style homes of the 1950s are ever popular for those looking for a one floor living plan who are not afraid to recapture a retro look, or something more open with glass such as garden doors opening onto a landscaped patio or view of a park like backyard. Designing for seniors means paying attention to details such as uncluttered hallways and wheelchair accessible traffic zones, but it doesnt preclude the designer from planning style and space that feels like home.
Working with an architect to bring together your design ideas, your creativity, an outline of what your needs may be for comfort, space, budget, maintenance and functionality, are all necessary details and requirements that go in to the design of a building that not only serves its occupants but feels inviting like home.